When we build our dream home, we do everything to make the inside walls look beautiful. We buy the most expensive and premium paint from the market. Sometimes the walls just do not look that great even after we paint them. We will see holes or dark spots, on the walls when we turn on the light
This happens because we make some mistakes in choosing and using interior wall putty. Let us know the simple answers to the 3 biggest questions and problems related to interior wall putty today.
1. Is Putty Necessary Even After Applying Expensive Paint?
Many people think that when they have bought the most expensive ‘plastic paint’, why spend money on putty? This is the biggest misunderstanding.
The job of paint is only to color the wall, not to level it. If you apply paint directly on cement plaster, the wall will look rough. Also, plaster absorbs a lot of paint. This means your expensive paint will cost twice as much. Wall Putty fills the small pores of the wall. This reduces paint consumption and gives a glass-like shine to the walls.
2. Why Does Paint Peel Off Even After Applying Putty?
This is the most common problem. People complain that they applied good putty, but it still started to fall off. The reason behind this is not bad putty, but these two reasons:
- Applying a thick coat: Some painters apply a single thick coat of putty to finish the work quickly. A thick coat cracks very easily after drying. Putty should always be applied in two thin coats.
- Starting work on a wet wall: If we put putty on the wall right after it has been plastered, without giving it time to dry the moisture gets pushed out to the surface of the wall.
3. How to Choose the Right Putty from the Market?
Mainly two types of putty are used for interior walls:
- Cement-based putty: It comes in powder form. It is very strong and is considered best for the first coat on new plaster.
- Acrylic putty: It is a ready-to-use thick paste. If you want a velvet and super-smooth finish in your living room or bedroom, then acrylic putty is the best choice.
4. Why is Shashwat Interior Wall Putty Special Among Other Putties in the Market?
Keeping all the above problems and precautions in mind, Shashwat Premium Interior Wall Putty has been prepared. It is better than common putties in the market because:
- Cement strength and acrylic smoothness together: It gives both cement-like strength to new concrete plaster and a super-smooth velvet finish to the rooms at the same time.
- Crack-free thin formula (best for two coats): Its texture is so fine that your painters can easily apply two thin coats. This removes the risk of cracks and peeling.
- Ultra-white base and paint savings: It seals the pores of the plaster to reduce paint absorption. Also, its white base brings out the true shade of the paint.
- Eco-friendly and low odor (Low VOC): This has a low-VOC formula. It does not release any chemical gas or strong smell. This keeps the air inside your home safe.
- Easy sanding and less dust: The special formula makes it easy to sand. It also creates little dust. This means your household items stay clean.
Paint is like the skin of your house. Putty is, like its backbone. For walls that look beautiful and last long do not just spend a lot on paint. Also use a base. If you apply putty the way your home interior will look new for years.
So why wait? Today, choose Shashwat Wall Care’s Premium Interior Wall Putty to give your dream home a velvet shine and give your walls the strength they deserve.
For right advice or to book an order, visit shashwatwallcare.com today!
